ISSN: 2456-043X

International Journal of Engineering Science and Generic Research

An International Peer Review Journal for Engineering Science and Generic Research

AUTHOR INSTRUCTION

GUIDELINES FOR AUTHOR

International Journal of Engineering Science and Generic Research (IJESAR) is a Bimonthly journal which publishes original research articles, review articles, case reports, short communications in the field of Pharmaceutical, Medical and Biological sciences.

IJESAR allows free unlimited access to abstract and full-text. The journal focuses on rapid publication with facilities of, online research article tracking & Email/SMS alert etc. Manuscripts are accepted for review with the understanding that same work has not been published, that it is not under consideration for publication elsewhere, and that its submission for publication has been approved by all authors and institution where the actual work was carried out.

International Journal of Engineering Science and Generic Research (IJESAR) publishes the following manuscript types:

  • Original Research Articles
  • Review Articles
  • Short Communications
  • Case Study

SUBMISSION OF THE MANUSCRIPT

All submissions must be in the English and should be submitted by the online submission system. Each manuscript will be provided with a manuscript ID and all correspondence is done through e-mail. Please always refer to the manuscript ID for any further enquiries. Authors are invited to suggest up to three potential reviewers, together with their contact details (e-mail addresses are essential). In case of any problem through the online submission, submit manuscripts to our mail: info@ijesar.in along with a covering letter preferably by the corresponding author.

MANUSCRIPT STRUCTURE

RESEARCH ARTICLE FORMAT

The preferred format of all manuscripts are in MS office (2003 or above). Manuscript should be concisely typewritten in 1.5 spaces in A4 sized sheets. The pages shall be numbers consequently. Only on one side, with a 1″ margin on all sides. The manuscript shall be prepared in Times New Roman using a font size of 12 and title shall be font size of 14, bold space capitals. All section titles in the manuscript shall be in font size 12, bold face capitals and subtitles in each section shall be in font size 12, bold face lower case. Illustrations (Figures & Tables) must be inserted at appropriate place in the article. Standard International Units should be used throughout the text. Pages should be numbered properly. There shall not be decorative borders anywhere in the text including the title page. The manuscript should be starting with the title page and the text should be arranged in the following order:

  • Title Page
  • Abstract
  • Keywords
  • Introduction
  • Materials and Methods
  • Results and Discussion
  • Conclusion
  • Acknowledgements
  • References

Title Page

The title should be as short as possible on the first page and provide precise information about the contents. The title should be followed by full names of author (s), affiliations of author (s) and institutional addresses.

Authors and Co-Authors Details and Their Affiliations

Each author must provide their full name including their forenames and surname. The Corresponding Author of the manuscript must be marked with an asterisk*, and should be listed first. In addition the corresponding author must include Telephone and E-mail address at the bottom left corner of the title page. If any of the co-authors are from different organizations, their addresses too should be mentioned and indicated using numbers after their names. Maximum 6 authors should be allowed.

Abstract

Provide on a separate page an abstract of not more than150-250 words. A concise and factual abstract is required. The Abstract should be informative and completely self-explanatory, briefly present the topic, state the scope of the experiments, indicate significant data, and point out major findings and conclusions. An abstract is often presented separately from the article, so it must be able to stand alone. For this reason, standard nomenclature should be used and abbreviations and references should be avoided.

Keywords

Provide three to six appropriate keywords after the abstract.

Materials and Methods

It should be complete enough to allow experiments to be reproduced. All the procedures should be described in detail, previously published procedures should be cited, and important modifications of published procedures should be mentioned briefly. Capitalize trade names and include the manufacturer's name and address. Subheadings should be used. Methods in general use need not be described in detail.

Results

Results and their significance should be presented clearly and concisely, preferably in the form of graphs and tables which should be self explanatory.

Discussion

It should contain a critical review of the results in the light of relevant literature. Results and Discussion may be combined.

Conclusions

This should state clearly the main conclusions of the research and give a clear explanation of their importance and relevance. Summary illustrations may be included.

Acknowledgement

Acknowledgements should be placed in a separate section after the conclusion. If external funding has been obtained for the study, then that should be mentioned under a separate header “Funding”, after the acknowledgements.

References

The authors are responsible for the accuracy of the bibliographic information. It must be numbered consecutively in the order that they are cited in the text and designated by superscript with square brackets after the punctuation marks. ([X]) A list should be included on separate 1.5spaced pages at the end of the text. For the proper abbreviations of the journal titles, refer to “Chemical Abstracts”. The style and punctuation of the references should confirm to the following examples:

Journal references

  1. Cantarelli MA, Pellerano RG, Marchevsky EJ, Camina JM. (Title of article). Anal Sci, 2011; 27(1): 73-8.
  2. Sather BC, Forbes JJ, Starck DJ, Rovers JP. (Title of article). J Am Pharm Assoc, 2007; 47(1): 82-5.

Books

  1. Meltzer PS, Kallioniemi A, Trent JM. Chromosome alterations in human solid tumors. In: Vogelstein B and Kinzler KW (eds.). The Genetic Basis of Human Cancer, New York; McGraw-Hill: 2002, pp. 93-113.
  2. Bard AJ, Faulkner LR. Electrochemical Methods: Fundamentals and Applications. 2nd ed., New York; John Wiley and Sons: 2001.

Patents

  1. Aviv H, Friedman D, Bar-Ilan A, Vered M. US Patent, US 5496811, 1996.

Websites

  1. Database of Natural Matrix Reference Materials, Compilation prepared by International Atomic Energy Agency (IAEA), http://www.iaea.org/programmes/nahunet/e4/nmrm/browse.htm/.

For other types of citation, please see “Uniform Requirement for Manuscripts Submitted to Biomedical Journals: Sample References” at www.nlm.nih.gov/bsd/uniform_requirements.html

Tables

These should be numbered with Arabic numerals. Each table should be typed using a table format (i.e., each variable must be typed into a separate cell in the table). The title should be typed at the top of the table in the sentence case format, i.e., only the first name should be in capital letters; as appropriate. Any footnote should be typed at the bottom of the table in italic.

 

Sr. No.

Title

Title

Title

Title

1.

 

 

 

 

2.

 

 

 

 

Illustrations and Figures

Figures must be numbered independently of tables, multimedia, and 3D models and cited as the relevant point in the manuscript text, e.g. "Fig. 1", "Fig. 2", etc. All figures including photographs should be numbered consecutively in Arabic numerals in the order of their appearance in the text and bear a brief title in lower case bold face letters below the figure. Do not duplicate data by presenting it both in the text and in a figure. For any figure directly extracted from previously published materials, you must have written permission from the publisher of that figure for reprint use. A copy of that permission release must be submitted with your article.

REVIEW ARTICLES

Review articles should not be more than 25 pages and contain comprehensive coverage of relevant literature. Review articles should preferably be written by scientists who have in-depth knowledge of the topic. All format requirements are similar to those applicable to Research papers. Review articles need not to be divided into sections such as Materials and methods, and Results and discussion, but should definitely have an abstract and introduction.

SHORT COMMUNICATIONS

The research and technical communications section of this journal (maximum 3,000 words) is open to interesting results worthy of publication without requiring extensive introduction and discussion. This section should be organized as follows: Abstract, Introduction, Materials and methods, Results and discussion (combined). Not more than 10 references should be provided. Tables, figures and references are to be arranged in the same way as for research papers. Brevity of presentation is essential for this section.

Note: Figures and tables should be included at appropriate place in the manuscript

Chemical Terminology: The chemical nomenclature used must be in accordance with that used in the Chemical Abstracts

Biological Nomenclature: Names of plants, animals and bacteria should be in italics.

Enzyme Nomenclature: The trivial names recommended by the IUPAC-IUB Commission should be used. When the enzyme is the main subject of a paper, its code number and systematic name should be stated in its first citation in the paper.

Symbols and Abbreviations: Use only standard abbreviations. The use of non-standard abbreviations can be extremely confusing to readers. Avoid abbreviations in the title. The full term for which an abbreviation stands should precede its first use in the text unless it is a standard unit of measurement.

ETHICAL MATTERS

Authors involving in the usage of experimental animals and human subjects in their research work should seek approval from the appropriate Institutional Animal Ethics Committee in accordance with "Principles of Laboratory Animal Care". The material and methods section of the manuscript should include a statement to prove that the investigation was approved and that informed consent was obtained.

PUBLICATION MALPRACTICE

The IJESAR Journal is committed to upholding the highest standards of publication ethics and takes all possible measures against any publication malpractices. All authors submitting their works to the IJESAR journal for publication as original articles attest that the submitted works represent their authors’ contributions and have not been copied or plagiarized in whole or in part from other works. The authors acknowledge that they have disclosed all and any actual or potential conflicts of interest with their work or partial benefits associated with it. In the same manner, the  journal is committed to objective and fair double-blind peer-review of the submitted for publication works and to prevent any actual or potential conflict of interests between the editorial and review personnel and the reviewed material. Any departures from the above-defined rules should be reported directly to the Editors-in-Chief, who is unequivocally committed to providing swift resolutions to any of such a type of problems.

AUTHORSHIP

A manuscript will be considered for the publication based on the below understanding:

  1. All named authors should agree to its submission
  2. It is not currently being considered for the publication by another journal
  3. If the paper is accepted, it will not be subsequently published in the same or similar form in any language without the consent of publishers Any changes to the author list after submission, viz., a change in the order of the authors, deletion or addition of the authors needs to be approved by a signed letter from each author.

COPYRIGHT

Submission of the manuscript represents that the manuscript has not been published previously and is not considered for publication elsewhere. Authors would be required to sign a Copy Right Transfer Agreement Form once the manuscript is accepted.

GALLEY PROOFS

Unless indicated otherwise, galley proofs are sent to the address given for correspondence. It is the responsibility of the corresponding author to ensure that the galley proofs are returned without delay.

PRIVACY STATEMENT

The names and email addresses entered in this journal site will be used exclusively for the stated purposes of this journal and will not be made available for any other purpose or to any other party.

AUTHOR FEES

This journal charges the following author fees.

Article Submission: 0.00 (INR)

Authors are required to pay zero rupees for an Article Submission never pay Fee as part of the submission process to contribute to review costs.

If this paper is accepted for publication, you will be asked to pay an Article Publication Fee to cover publications costs.